Clarke Clarke 75×3.05mm Clipped Head Nails for CFN34 Pk200 | Tools and Machinery Supplies : Great Range, Great Prices

Disclosure :This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Clarke Clarke 75×3.05mm Clipped Head Nails for CFN34 Pk200

Related Products :

Categories
Categories

Best Sellers
- Machine Mart Xtra Facom S.28LA 1/2″ Drive 12 Point Long Reach OGV Socket 28mm
  
  Higher torque without damage to fasteners ! The OGV profile is achieved by a succession of curves instead of the flats found in conventional sockets. More Read More »
- SCH Supplies SCH Supplies 60″ Deep Mounted Slitter Attachment (Replaceable Tines)
  
  This fine turf slitter is equipped with slender hardened blades with knife edges. This gives a clean penetration into soil leaving the surface free from any Read More »
- Facom Facom 986095 Crimping Pliers for Tubular Terminals With Rotating Dies
  
  Crimping Pliers for Tubular Terminals With Rotating Dies Read More »
- National Abrasives National Abrasives 25m 320G Soft Flex Gold Abrasive Pad
  
  200 140 x 115mm tear off perforated foam backed Gold abrasive pads ideal for sanding car bodywork, paint and woodwork. Read More »
- Clarke Clarke HSE361A 50mm Submersible Water Pump – (110V)
  
  Suitable for pumping both clean and dirty water. Ideal for pools, fish pond circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water Read More »
- Machine Mart Xtra Laser 5502 Brake Drum Wear Gauge
  
  A simple to use tool used to measure the wear limit on brake drums as well as to measure the diameter of the drum and then Read More »
- Machine Mart Xtra Facom JX.25 3/8″ Torx Bit Socket T25
  
  A useful addition to your toolbox. Facom’s precision engineered hardwearing bit sockets are made to last. Read More »
- Einhell Einhell TC-MD 50 Digital Detector
  
  The Einhell digital detector TC-MD 50 is an indispensable helper for DIY enthusiasts: in the home, at the building site or for renovation work. The digital Read More »
- Trend Trend SNAP/TH/2 Snappy Tool Holder 60 piece
  
  Heavy duty fabric tool holder with the capacity to hold up to 60 tools from the Trend Snappy range. Read More »
- Clarke Clarke ET101 8-Piece Short Drive/Pin Punch Set
  
  A comprehensive 8 piece short drive set for general engineering use. Read More »
- V-TUF V-TÜF® M-CLASS MINI240 15L Dust Extractor (230V)
  
  This vacuum is certified M Class for hard woods, board materials, concrete and brick dust, dust extraction rating set by HSE filters out 99.9% of harmful Read More »
- Facom Expert by Facom E117740B – Offest Combination Spanner 28mm
  
  This Expert by Facom 28mm Offset Combination Spanner features a 12-point OGV ring angled at 10 degree at one end and an open end angled at Read More »
- Clarke Clarke CTC900B Mechanics’ Steel 9 Drawer Tool Chest
  
  Keep your tools organised and safe with this highly popular secure tool chests, comprising of 9 drawers plus a top tray with a sturdy triple hinged Read More »
- Draper Roughneck 700mm 1.2TPI Concrete Saw
  
  With a durable build and sharp 700mm (28”) blade, this saw is suitable for cutting concrete blocks, bricks and breeze blocks. Read More »
- Facom Facom 433.LMT Half Round Thin Nose 45° Gripping Pliers
  
  Micro-Tech tools are specially designed by Facom to optimise gripping, cutting and handling of small components. Read More »

Today’s Deals
- Machine Mart Xtra Laser 5588 – Torx T50 Star Bit Socket
  
  This T50 Star bit from Laser is designed and manufactured specifically for use with Ford Transit vans. At 125mm, this bit is the perfect length for Read More »
- Clarke Clarke CJL25D Jump Leads
  
  These robust, professional quality jump leads ensure good power transfer between vehicle batteries with minimal loss of current. Always carry a pair to help yourself or Read More »
- Wolf-Garten Wolf-Garten S3800E 38cm 1400W Lawnmower
  
  The Wolf-Garten S3800E Lawnmower features a plastic chassis and one hand switch for user comfort. Read More »
- Bosch Bosch PSA 900 E Sabre Saw (230V)
  
  The PSA 900 E sabre saw is easy and intuitive to operate, allowing you to carry out controlled sawing work. This powerful tool is equipped with Read More »
- Clarke Clarke Devil 900 Propane Fired Space Heater
  
  The Devil 900 is guaranteed to keep you warm in the workshop, garage or factory thanks to the impressive 24.9kW output which provides a highly efficient Read More »

Popular Products
- Machine Mart Xtra Makita 6904VH Impact Wrench (110V)
  
  196Nm Max Fastening Torque. 2 speed selection with variable speed in both ranges. Light weight design for comfort and control. Rugged housing with rubber bumper for Read More »
- Machine Mart Xtra TB Davies 5 Tread Platform Step Ladder
  
  This lightweight aluminium 5 tread platform step ladder is perfect for short tasks light trade tasks around the home and office. The step ladder folds away Read More »
- Facom Facom AWDH3X150 Protwist Screwdriver Heavy Duty Power Pozidrive 3X150
  
  Facom Protwist screwdrivers offer good torque transmission and fast screwing speed. They have a natural grip and excellent comfort which leads to – Efficient pre-tightening, Comfortable Read More »
- Clarke Clarke 4″ Masonry Cutting Disc
  
  100mm (4″) angle grinder disc purposely made to cut masonry, brick & stone. Depressed centre prevents the retaining nut from fouling the work piece so flat Read More »
- Trend Trend 33/60X8MM Arbor 8mm Shank
  
  Standard duty arbor with 1/4 inch spindle and spacers.OL 63.5 mmSpigot dia. 1/4 inchSpigot dia. 6.35 mmSpigot length incl thread 35.5 mmSpigot thread length 14.5 mm Read More »

Monthly Choice
- DeWalt DeWalt DCN660P2 18V XR Brushless 16GA Nailer with 2×5.0Ah Batteries
  
  This DeWalt Nailer has been constructed with a BRUSHLESS motor which is designed to offer runtime that cannot be beaten in a compact package, whilst the Read More »
- Streetwize Streetwize SWTT109 Single Caravan Step
  
  This 25cm high single caravan / motorhome step features a rugged steel construction with a powder coated finish. The large grip pad ensures you step with Read More »
- Sealey Sealey TBT05 8 Piece Tool Tray with T-Handle TRX-Star Key Set
  
  An 8 piece key set that is designed to fit Sealey AP24 topchests, rollcab and workstation range.Contains:T9x 85, T10x 85, T15x 85, T20x 85, T25x 85, Read More »
- Clarke Clarke CAF005 Air Filter 0.1micron
  
  A high efficiency air filter with maximum 16bar operating pressure, ideal for use with Clarke’s range of vertical air compressors, refrigerant dryers and industrial screw compressors. Read More »
- Teng Teng TCMM545N 545 Piece Toolkit
  
  A 545 piece work station tool kit built up using the unique Teng Tools TC tray system and the Teng Tools wall rack system to put Read More »