Category Archives: Hand Tools
Clarke Clarke CHT396 – 150 Piece R-Clip Assortment
This useful selection of R-Clips / Hitch pins, in six different sizes, will cover virtually all general requirements.
Machine Mart Xtra Facom 50.80SR 80mm Non-Sparking Metric Slogging Ring Wrench
The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when in use. Manufactured from a special Copper-Beryllium alloy, these ‘explosion proof’, non-magnetic and corrosion resistant tools are suitable for use in a wide range of industries such as mining,
Laser Laser 5031 23 Piece Torx Plus Bit Set
This five and six sided star – Torx Plus* set offers security and standard bits in high quality S2 steel. A stainless steel bit holder with quick chuck shank is included. Other accessories include a 1/4″D x 1/4″bit holder and a 3/8″D x 10mm bit driver both manufactured from Chrome Vanadium
Machine Mart Xtra Facom 265.29SR 24mm Non-Sparking Chisel
The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when in use. Manufactured from a special Copper-Beryllium alloy, these ‘explosion proof’, non-magnetic and corrosion resistant tools are suitable for use in a wide range of industries such as mining,
Clarke Clarke CHT225 Bearing Separator 50-75mm
Stripping down for overhaul or repair? Here’s a simple yet effective way to remove stubborn, tight fitting components from their shafts. Suitable for bearings, gears and bushes. Use with standard pullers (not supplied)
Machine Mart Xtra Facom 440.55SR 55mm Non-Sparking Metric Combination Wrench
The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when in use. Manufactured from a special Copper-Beryllium alloy, these ‘explosion proof’, non-magnetic and corrosion resistant tools are suitable for use in a wide range of industries such as mining,
Clarke Clarke CHT266 10″ Soft Jaw Waterpump Pliers
Although designed essentially for plumbing work, these water pump pliers have much wider application. Made from high carbon steel chemically blackened, this versatile tool can be used with or without the soft plastic jaws designed to safeguard decorative plumbing fittings.
Facom Facom K.1P5/8SR 3/4″ Drive Non-Sparking Socket (1-5/8″)
The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when in use. Manufactured from a special Copper-Beryllium alloy, these ‘explosion proof’, non-magnetic and corrosion resistant tools are suitable for use in a wide range of industries such as mining,
Wera Wera 867/4Z Extra Tough Screwdriver Bit TX30/89
Wera’s ductile, tough and absorbing screwdriver bits are made from high quality and high strength materials. The unique hardening processes makes them incredibly hard wearing and the first choice for the professional. Suitable for general use but also ideal for metal applications; screwdriving self-tapping screws into sheet metal or where fasteners are driven to a
Clarke Clarke PRO217 9 Piece Combination Spanner Set
Manufactured from Chrome Vanadium steel with a polished finish Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9 & 10mm
Machine Mart Xtra Laser 2159 40 piece Tap and Die Set
Practical use Tap and Die Set with Tap and Die Holders, adjustable tap wrench and sliding tap wrench & thread gauge.Set contains taps and dies in the following sizes:-Fine Thread M3, M4, M5, M6, M7, M8, M10, M12 Coarse Thread M3, M4, M5, M6, M7, M8, M10, M12 and M27 1/8″NPT 27
Facom Facom 427.MT 30° Angled-Nose Cutting Pliers 120mm
Micro-Tech tools are specially designed by Facom to optimise gripping, cutting and handling of small components.
Lifting & Crane Lifting and Crane Scaffold Hoist Swing Arm – SHSA
Lifting & Crane’s 180 degree rotational swing arm is to facilitate clear lifting space on site; in other words, it gives the Lifting & Crane Builders and Scaffolding Hoist a much greater scope for operation.
Facom Facom JB.5/8 3/8″ Drive Thin Wall Socket 5/8″AF
Higher torque without damage to fasteners ! The OGV profile is achieved by a succession of curves instead of the flats found in conventional sockets. More powerful tightening: Larger contact area between socket and fastener minimises stress. Less wear: Torque is transmitted through the fastener flats instead of the corners. Increased durability: Stress concentration in
Facom Facom 49.46SR 46mm Non-Sparking Metric Open End Slogging Wrench
The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when in use. Manufactured from a special Copper-Beryllium alloy, these ‘explosion proof’, non-magnetic and corrosion resistant tools are suitable for use in a wide range of industries such as mining,
Facom Facom 180.CPESLS High-Performance Multi-grip Pliers
Equipped with a FACOM SLS attachment solution, preventing any risk of accidental falls. The crimped “rotating” cable solution, selected and tested by FACOM, maintains user ergonomics. Ideal for confined spaces, these long reach thin nose Pliers have a 44mm capacity. They have double heat-treated tips for high wear resistance and a hardness of 60/62 HRc.
Clarke Direct On-Line (DOL) Starter 6.3-10Amp
This Direct On-Line (DOL) Starter is suitable for single or 3 phase supplies/motors. Select the correct model according to the Amperage of your motor.
Machine Mart Xtra Facom 49.95SR 95mm Non-Sparking Metric Open End Slogging Wrench
The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when in use. Manufactured from a special Copper-Beryllium alloy, these ‘explosion proof’, non-magnetic and corrosion resistant tools are suitable for use in a wide range of industries such as mining,
Machine Mart Xtra Facom 57.11X13 Half Moon Spanner 11x13mm
Half-moon spanners reach where standard tools cannot. 12-point ring giving 30° increments. Satin chrome finish. ISO 3318, NF ISO 3318.
Facom Expert by Facom Ratchet Combination Spanner 13mm
A 13mm ratchet combination spanner from the Expert by Facom range, a world leading brand in hand tools which are designed to meet the needs of Industrial and Automotive professionals.
