Category Archives: Hand Tools
Draper Draper ETK21 Timing Kit for PSA
A complete set of essential tools for replacing the timing belt/chain or correcting the belt/chain tension. Ideal for professional vehicle technicians.Suitable for all Citröen vehicles with the following engine codes: (TU3JP/L3), (TU3JP/L4), CDY, CDZ, HDY, HFX(TU1A), KDX, KDY, KFV (TU3A), KFV (TU3JP), KFW, KFW (TU3A), KFX, KFX (TU3JP), KFX (TU3JP/IFL4), KFX (TU3JP/L4), KFX (TU3JP+/L3), TU1AJP/L4Peugeot
Draper Draper Expert EPTW70-230 1/2” Square Drive Precision Torque Wrench
Draper’s EPTW70-230 Expert 1/2” Square Drive Torque Wrench has been constructed with a reversible ratchet head and locking preset action, whilst the torque values are viewed via a window in the handle.Manufactured and calibrated to ISO6789-1992-12-01 Standard
Elora Elora 770-L1K 270mm 1/2″ Sq. Dr. Soft Grip Reversible Ratchet
This Elora ratchet is 270mm long with a Quatrolit soft grip handle for user comfort and chrome vanadium steel hardened and chrome plated for corrosion protection. Professional quality 72 fine tooth ratchet 270mm long, with forward/reverse selector.
Draper Draper MBPP1 Expert 240mm Motorcycle Brake Piston Pliers
These pliers are designed for the removal of seized pistons without damaging outer piston surface. Knurled clamp blocks allow secure grip of inner piston face.
Elora Elora 770-L3 300mm 1/2″ Square Drive Sliding T Bar
Elora’s 1/2″ Square Drive Sliding T Bar has been constructed from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection and meets DIN 3122 Form A/ISO 3315 specifications.
Draper Draper Expert ETW6-30 1/4” Drive Electronic Precision Torque Wrench
The Draper ETW6-30 Electronic Precision Torque Wrench features nine pre-selectable torque levels for speed of operation and a soft grip handle for user comfort.
Draper Draper MCSK4 Expert Motorcycle Spindle Key
The Draper MCSK4 Spindle Key is for the for the removal of hollow wheel spindles.
Knipex Knipex Self Adjusting Insulation Stripper
Professional Quality manufactured in fibreglass reinforced plastic making this tool both light and strong, it is well suited for repetitive tasks where ergonomic design and lightweight are desirable. The tool adjusts to suit the cross section automatically when used with standard insulation cables, preventing damage to the conductor. Repetitive tasks are further eased by an
Draper Draper 770-LSSMF 58 Piece 1/2″ Sq. Dr. Metric Whitworth and Metric Socket Set
This socket set from Draper has been manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Packed in heavy gauge steel storage case with foam insert.
Draper Draper ETK23 Timing Kit for Fiat, Lancia & Ford Vehicles
A complete set of essential tools for replacing the timing belt/chain or correcting the belt/chain tension on Fiat, Lancia and Ford vehicles. Ideal for professional vehicle technicians.Suitable for all Fiat vehicles with the following engine codes: 169A4.000, 199A4.000, 188A4.000 (EV02 ONLY)Lancia vehicles with the following engine codes: 169A4.000, 350A1.000Fords with the following engine code: FP4.
Draper Knipex 200mm Combination Plier – Heavy Duty Handle
The Knipex 200mm Combination Plier has a Heavy Duty Handle and is professional quality. It is manufactured from special tool steel, oil hardened and tempered. It has ground heads with cutting edges separately induction hardened to 60HRC for cutting hard and soft wires. Heavy duty moulded handles and slip guards for extra comfort and safety.
Machine Mart Xtra Draper Expert IBP2 Large Insert Bearing Puller Kit
The Draper Expert IBP2 Insert Bearing Puller Kit allows the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself. Suitable for use with ISO bearing sizes: 6207-6011; 6305-6308 and 6403-6405. The Draper 43136 has been manufactured from hardened and tempered steels chemically blacked for corrosion protection.
Knipex Knipex ‘X-CUT’ High Leverage Diagonal Side Cutters
These ‘X-CUT’ Diagonal Side Cutters have been manufactured from chrome vanadium heavy duty steel, oil hardened and tempered. Smoothly ground heads with separately induction hardened cutting edges for cutting piano and medium hard wires. The cutter has a double supported axis allowing for 40% less effort when cutting compared to high leverage cutters of the
Machine Mart Xtra Draper Expert RCC 280mm Ratchet Action Cable Cutter
The Draper Expert RCC 280mm Ratchet Action Cable Cutter has been constructed from a hardened and tempered special grade tool steel. The cutting edges on the Draper Cable Cutter are precision ground and hardened for extra strength delivering extra cutting power without deformation of the cable. These Draper 64329 Cable Cutter have an easy to
Elora Elora 100 S 12M 12 Piece Metric Open End Spanner Set
These Draper spanners have been constructed from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection, whilst the jaws have accurate face openings and are offset at 15 degree .
Elora Elora 205 S6W 6 Piece Long Whitworth Combination Spanner Set
The Elora 205 S6W Combination Spanner Set has been forged from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Polished bi-hexagon ring and jaw offset at 15 degree .
Knipex Knipex 190mm Forged Wire Rope Cutters
This professional quality 190mm wire rope cutter features a forged head, body and handles under heavy duty moulded handles. Captive opening spring in the joint and the jaw geometry prevents wire rope from fanning out. Also suitable for cable and small diameter round steel.
Knipex Knipex 165mm Copper or Aluminium Cable Shear with Sprung Handles
Professional Quality, forged from special tool steel, oil hardened and tempered. Smoothly ground head with cutting edges precision ground and hardened. Suitable for cutting, stripping and dismantling. Plastic coated spring opening handles, with lock.
Elora Elora 770-S1U 500mm 3/4″ Sq. Dr. Reversible Ratchet
This Elora reversible ratchet provides professional quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Close quarter 32 tooth ratchet, 500mm long, with quick changeover lever for forward/reverse operations with locking pin for secure socket holding.
Knipex Knipex 200mm Long Nose Pliers
Professional Quality, manufactured from special tool steel, oil hardened and tempered. Smoothly ground head with cutting edges separately induction hardened to 61HRC for cutting hard and soft wire. Straight, long flat-round jaws are serrated for easy grip.
