Category Archives: Power Tools
Draper Draper SMS305E Double Bevel 305mm Mitre Saw (230V)
This Draper Mitre Saw features a double beveled edge and laser cutting guide for added accuracy. The saw has a maximum cut capacity of 310mm with a maximum depth of cut of 105mm and a cutting speed of 4800rpm. Completing the SMS305 is Draper’s trademark high quality build to ensure excellent reliability.
Sealey Sealey VSE204 Diesel Engine Compression Test Kit
Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector. Suitable for testing cars and light commercial vehicles with direct or indirect injection. Pressure relief valve allows repeated on-vehicle tests. Includes 90 degree coupling adaptor for limited access applications. Supplied in carry-case.
Clarke Clarke C2MS210MP 8” 210mm Double Bevel Sliding Mitre Saw (230V)
The Clarke C2MS210MP comes with a two speed motor with soft start for multi-material cutting, including hard and softwoods alongside non ferrous metals (aluminium, copper etc) and plastics. The maximum mitre angle for this saw is 45 degree left/right and it also features a maximum bevel angle of 45 degree .Completing this mitre saw is
Sealey Sealey VSE3157 Diesel Compression Gauge, Hose & TDC Base Kit
Evolution Evolution Fury 165mm Replacement Multi-Purpose TCT Blade
The F165-TCT multipurpose blade allows Evolution saws to easily and cleanly slice through mild steel, aluminium, plastics and wood, even wood with nails. The hardened blade body ensures the blade runs truer for longer and is an invaluable addition to any home workshop. An Evolution designed TCT tooth configuration combined with high-grade carbide teeth, enables
Laser Laser 7510 External Deburr/Chamfer Tool: 3-19mm
In your busy workshop there are countless ways for threads to get damaged: knocking a track rod end with a hammer; cutting a bolt or threaded rod to length; driving a driveshaft out of a hub — the threaded ends get torn and squashed. Wheel studs get damaged just by removing and refitting the wheels…
Clarke Clarke C2MS250MP 10” 255mm Double Bevel Sliding Mitre Saw (230V)
The Clarke C2MS250MP comes with a two speed motor with soft start for multi-material cutting, including hard and softwoods alongside non ferrous metals (aluminium, copper etc) and plastics. The maximum mitre angle for this saw is 45 degree left/right and it also features a maximum bevel angle of 45 degree .Completing this mitre saw is
V-TUF V-TUF 1200W Mini Plus Dust Extractor (230V)
V-TUF V-TUF Mini Plus Dust Extractor (110V)
Sealey Sealey WCH01 Welding Chipping Hammer & Brush
Sealey Sealey VS156 Piston Ring Compressor 75mm Ø60-175mm
Sealey Sealey SWV215 Welding Vice 215mm
Sealey Sealey RE23RS Coil Spring Compressor Restraint System
Sealey Sealey TL95 Timing Light Diesel Converter Box
Sealey Sealey VS7032 Bearing Race & Seal Driver Set 52pc
Sealey Sealey VS1823 Valve Seat Cutter Set 10pc
Sealey Sealey VS301 Spark Plug Thread Repair Kit
Comprehensive and time saving kit of spark plug thread repair tools. Especially suitable for the repair of deep-seated plug configurations. Incorporates taper and plug taps together with integrated ream. Stepped tap ensures correct alignment of cutter in existing spark plug hole. Extension tools allow easy access to the bottom of the plug recess. Includes set
Sealey Sealey RE2311 Coil Spring Compressing Station with Gauge Hydraulic 2000kg
Foot operated hydraulic unit, with gauge showing force applied to the spring under compression. Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications. Fitted with plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer’s warranty.