Category Archives: Power Tools

Trend Trend RBT/3 Routabout Kit 18mm x 1/2″ Shank

Access to pipes & cables beneath chipboard floors in seconds.Shank Diameter 1/4 inchFloor thickness 22 mmAccess hole diameter 250 mmMax. load capacity 200 kgThis product includes: 1 x Routabout template3 x Spacer rings1 x Special TCT router cutter1 x 30mm Plastic guide bushPlease refer to UK Building Regulations Approved Document B and any amendments before

Trend Trend CE/8635 8mm 1/4″ to Collet Extension

This collet extension has an 8mm shank and a 1/4″ collet. It is for use in router tables where there is a limited router cutters shank length available.Shank size 8 mmCollet bore 6.35 mm (1/4 inch)Overall length 64 mmNut dia. max. 19 mmMaximum speed 18000 rpmMaximum tool dia 35 mmMaximum tool cut 25 mmRequires spanners

Trend Trend CE/CNS/635 1/4″ Collet Extension Collet & Nut Set

Multi-slit spring steel collet & nut set for the collet extension.This product includes:1 x Collet1 x Collet nut

Trend Trend CDJ300/05 Craft Dovetail 300mm Template Comb

A precision made laser cut, zinc plated steel template comb for the CDJ300.Material thickness. 8 mm – 17 mmMaterial width up to 300 mmThis product includes:1 x Template comb 1 x 15.8mmGuide bush 1 x 11.1mmGuide bush

TT Pumps TT Pumps RC Floating Suction Kit

RC floating kit contains strainer, non-return valve, float, suction hose (1.5m) and fittings

Trend Trend AQ63/W/25 Aquamac Strip 25m White

Weather strip is fitted into the window frame aperture using four cut lengths.It is important to create tight butt or notched joints to ensure high levels of window performance.Joints can be enhanced by the application of a small amount of silicone mastic.When fitted, it is necessary to notch the seal end.

Trend Trend CDJ600/01 Dovetail Jig Template

Precision made laser cut zinc plated steel template comb for the CDJ600.Material thickness. 8 mm – 12 mmMaterial width up to 600 mmThis product includes: 1 x Template comb1 x 7.8mm Guide bush

Trend Trend CE/127127 1/2″ Collet Extension

For use in router tables where there is a limited router cutters shank length available.Precision machined one-piece steel body.With a 1/2 inch shank, fitted with a multi-slit spring steel collet and collet nut. Use at maximum speed 18000 RPM.Increases cutter spindle length by 50mm. Maximum tool diameter 50mm. Maximum tool cut length 30mm.Requires 19mm &

Trend Trend RBTRNG18/10 10 x 18mm Routabout Rings

Replacement 18mm thick floor rings.

Trend Trend CSB/AP21680 Saw Blade 216mm X 80 TEETH X 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy.D 8 1/2 inchesD 216 mmBore 30 mmKerf 2.8 mmPlate thickness 1.9 mmNo. of Teeth 80Tooth form TCPHook Neg 6 degreesQuick Selector No. C19Colour Code Grey

Trend Trend RTI/PLATE Router Table Insert Plate

A large rigid router table insert plate for incorporation into user-made router tables.Plate size 306 mm x 229 mm x 9.5 mm.Max router weight 8 kgMax router base dia 200 mm

TT Pumps TT Pumps FLOCW-2 Float Counterweight

This counterweight is compatible with a range of float switches offering an optional stabilising weight which can be fixed at any point on the cable using the ‘O’ ring supplied.

TT Pumps TT Pumps FLOCW-4 Float Counterweight

This counterweight is compatible with a range of float switches offering an optional stabilising weight which can be fixed at any point on the cable using the ‘O’ ring supplied.

Trend Trend COMBI1002 1000mm Combi Worktop Jig

For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures.

Trend Trend TEMP/OTB/A Offset Trenching Base

Ideal for housing cuts where oversize or undersize board is used.Size 200 x 200 x 8 mm with 1.0 mm offset.Aperture dia. 30 mmMax. cutter dia. 26 mmThis product includes:1 x Hexagon shaped base1 x Dual 1/4 inch/8mm tapered line-up pin2 x Fixing screws

Trend Trend SNAP/D/3MM Snappy 3mm Drill Bit

A 3mm HSS drill bit gripped by a spring steel collet into the hex shaft.The Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders.

TT Pumps TT Pumps FLOCW-1 Float Counterweight

This counterweight is compatible with a range of float switches offering an optional stabilising weight which can be fixed at any point on the cable using the ‘O’ ring supplied.

Trend Trend ELLIPSEJ/A Ellipse Jig

Designed to enable virtually any router to cut ellipses and circles. Used for corner tables, arches, desks and mirrors.Setting-up and operating is simple and effective, as proven by existing industrial users.A connector plate on the end of the bar fits directly onto the fence rods of Trend routers.For the fixing of other makes of routers,

Trend Trend TEMP/NUC/57 57mm Number Templates

Clear plastic number templates for writing words for signs including house numbers. The templates are used with a 13mm guide bush and 8mm diameter cutter.

TT Pumps TT Pumps FLOCW-5 Float Counterweight

This counterweight is compatible with a range of float switches offering an optional stabilising weight which can be fixed at any point on the cable using the ‘O’ ring supplied.