Power Tools | Tools and Machinery Supplies : Great Range, Great Prices

Category Archives: Power Tools

Trend Trend VJS/TG/JIG Varijig Tenon and Grooving Jig

Allows grooves and tenons to be cut using a router.Working length based on 30 mm guide bush and 12 mm diameter cutter being used:-Max. without end stops used 412 mmMax. with one end stop used 397 mmMax. with two end stops used 382 mmMax. working width using end stops* (12mm dia. cutter) 18 mmMax. width

Enables mortise & tenons and dowel joints to be cut with a router.Material thickness min. 12 mmMaterial thickness max. 47 mmTenon thickness min. 4.8 mmTenon thickness max. 16 mmTenon width max. using vertical guide+ 90 mmTenon length max.++ Approx. 25 mmMortise length max. using vertical guide+++ 90 mmAngle tilt compound -10 degree to 45 degrees

The Mini Ellipse Jig is ideal for routing elliptical picture frames, mirrors, clocks and small coffee tables.Working on the same principle as the Ellipse Jig, the Mini Ellipse Jig, produced from plastic will cut much smaller ellipses.The main plate will accept most makes of small router for which screws are provided.By removing one slide and

This counterweight is compatible with a range of float switches offering an optional stabilising weight which can be fixed at any point on the cable using the ‘O’ ring supplied.

A solid laminate sub base which is suitable for the Triton TRB001 and MOF001 routers.Diameter 170 mmThickness 8 mmThis product includes: 1 x Sub base1 x Template Guide Bush1 x 1/2″ Line-up pin1 x 1/4″ Line-up pin

Clear plastic template for use with any plunge router to accurately fit 2, 3 and 5 lever sash and dead mortise locks.Size 320 mm x 135 mm x 8 mmIncludes templates for locks having the following face-plate dimensions:-Imperial (Metric) (D x OL)Template22.2×156 mm (7/8″x 6 1/8″)122.5×152.5 mm (7/8″x 6 ” )225.4×133.5 mm (1″x 5 1/4″

Ideal for housing cuts where oversize or undersize board is used.Size 200 x 200 x 8 mm with 1.0 mm offset.Aperture dia. 30 mmMax. cutter dia. 26 mmThis product includes:1 x Hexagon shaped base1 x Dual 1/4 inch/8mm tapered line-up pin2 x Fixing screws

Square sheet of clear acrylic for use when making routing templates and jigs.Size 8 x 495 x 495 mm

Lever extension handle for Varijig clamp guides.Length 180 mmWidth 27 mmThickess 9 mm

The HSS drill bit is gripped by a spring steel collet into the hex shaft.

Designed to hold longer screws securely onto the screwdriver bit with an extra magnetic ring.D 14 mmOL 62 mmShank Diameter 1/4 inch hexIncludes No. 2 Pozi bitThe Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders.

A routing template which allows a router to create a hinge recesses on a door.Size 214 mm x 135 mm x 8 mmDoor thickness min. 34 mmDoor thickness max. 44 mmHinge recess length 75 mmHinge recess length 100 mmThis product includes: 1 x 75mm hinge template1 x 100mm hinge template

Clear plastic 6mm template for use with a router and template profiling cutter to create a curved rail and panelled door.D 470 mmD2 398 mmC 102 mmR 372 mmDoor width possible 565 to 600 mm

Clear 6mm plastic inlay templates for use with inlay kit fitted to a plunge router.Width 137 mmHeight 135 mmThickness 6 mmTulip height approx.77 mmAperture size 86 mm x 86 mm

Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment .D 11/64 inchD 4.36 mmShank Diameter 1/4 inch hexScrew size No.12 (5.5 mm)The Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders.

This template jig is a well proven means of routing out stair housings quickly and accurately.Tread Thickness 22-32 mmSlider Diameter 30 mmNosing Adjustment 16-19 mmLength 858 mmHeight 485 mmWidth 9.5 mmWeight 6.17kgThis product includes:1 x Sub-base1 x Adjustable reversible clamp bar1 x Reversible clamp bar1 x Nosepiece1 x Line-up pin & bush2 x Spanners

A 9.5mm (3/8 inch) diameter stepped High Speed Steel drill for use with Pocket Hole Jigs.D 3/8 inchD 9.5 mmShank Diameter 1/4 inch hexPilot diameter 4.2mmPilot length 13 mmThe Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders.

For making templates, vacuum beds, jigs and fixtures. Size 6.5 x 580 x 580 mm

Plunge router base base accessory for the Varijig clamp guides.Plate length 228 mmPlate width 229 mmPlate thickness 6 mmThis product includes: 1 x 2mm A/F hex key

Comprises of the 8mm diameter Craft Range cutter Ref. C011X1/4TC and 13mm plastic guide bush.This product includes: 1 x Straight 8mm (5/16″ ) 1 x 13mm Template Guide Bush

Categories
Categories

Best Sellers
- Facom Facom 64.10X11 Ratchet Ring Spanner 10 X 11mm
  
  Facom’s precision engineered Ratchet Ring spanners have a compact ring head which perfectly replaces the ratchet and socket combination and provides the advantages of an extra Read More »
- Autolok AutoLok KFTB Tallboy Fold Down Post (Surface Mount)
  
  Ideal for protecting parking spaces and driveways, the KFTB Tallboy Fold down post from Autolok is easy to install and easy to use. Featuring 5 secure Read More »
- Fein Fein Select+ AWBP10 18V Angle Drill (Bare Unit)
  
  Angle drill up to 10 mm. Extremely small cordless angle drill for working in difficult-to-reach spots.Brushless FEIN PowerDrive motor, fully encapsulated and dust-protected with 30% higher Read More »
- Rodo Rodo Watertite Thermal Latex Glove
  
  These Thermal Latex Coated Waterproof Gloves provide maximum grip in wet and dry conditions. Read More »
- Draper Draper ST28 3/8” Magnetic Socket Tray For 28 Sockets
  
  The Draper 30905 is manufactured from a high-impact ABS plastic that has been fitted with a strong magnet to secure the sockets in place. This makes Read More »
- T. B. Davies TB Davies 3 Tread Punched 0.8m British Standard Mobile Safety Steps
  
  The TB Davies mobile safety steps feature a strong and durable tubular steel construction for commercial applications, with its double handrail, toe-boarded platform and enclosed guardrail Read More »
- Hyundai Hyundai DHY85KSE 85kVA Diesel Generator 230V & 400V
  
  The Hyundai DHY85KSE Diesel Generator provides trustworthy, efficient back-up power for your domestic or professional environment. It comes with a strong 78HP, 4 stroke water-cooled Hyundai Read More »
- Trend Trend Trendiwax – Lubricant Wax Stick 342gm
  
  Extends sawblade life by keeping blade cool at cutting points. For use when sawing aluminium. Use at regular intervals. Apply directly onto the teeth of a Read More »
- Greenworks Greenworks G40LM35K2 40V 35cm Mower with 2Ah Battery and Charger
  
  The Greenworks G40LM35K2 40V cordless mower benefits from a 40 litre capacity making it ideal for those with medium sized lawns. This model also comes equipped Read More »
- Teng Teng TTX474-9 4 Piece 9″ Circlip Plier Set
  
  4 piece Mega Bite circlip plier set consisting of 2 straight tip and 2 bent tip pliers for internal and external circlips. Fitted with return spring. Read More »
- Clarke Clarke CM265 300mm Vernier Caliper Digital
  
  Vernier caliper for accurate measurement of dimensions. Easy-to-read digital display.Download Product Manual Read More »
- Lifting & Crane Lifting and Crane Ratchet Lashing Wear Sleeves
  
  A pack of four 300mm Long Wear Sleeves to suit webbing up to 50mm wide. Read More »
- Streetwize Vitasol Metal Polish – 100g Tube
  
  Vitasol is an All Purpose Metal Polish specially formulated using the best available materials to polish, clean and protect all bright metal surfaces (e.g. chrome, aluminium, Read More »
- Facom Facom 190.16CPESLS End Cutters
  
  Equipped with a FACOM SLS attachment solution, preventing any risk of accidental falls, the crimped “rotating” cable solution, selected and tested by FACOM, maintains user ergonomics. Read More »
- DeWalt DeWalt D25902K SDS-Max Demolition Hammer (230V)
  
  This has been designed with a powerful and durable 1550W motor which delivers outstanding concrete breaking performance, Active Vibration Control system incorporating a counterbalance mass and Read More »

Category Archives: Power Tools

Categories

Best Sellers

Today’s Deals

Popular Products

Monthly Choice