Category Archives: Power Tools

Trend Trend SNAP/MD1/SET Snappy Masonry Drill Set

Tungsten Carbide Tipped masonry drills to suit wall plugs. This set includes:1 x 5mm masonry drill1 x 6mm masonry drill1 x 7mm masonry drill1 x 8mm masonry drillThe Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders.

Trend Trend TEMP/PD/R/D Panel Door Set Template

Clear plastic 6mm template for use with a router and template profiling cutter to create a curved rail and panelled door.D 376 mmD2 310 mmC 102 mmR 264 mmDoor width possible 470 to 510 mm

Trend Trend C176X1/4TC 8mm Dowel Drill

Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.D 8 mmC 35 mmOL 70 mmShank length 23 mmShank Diameter 1/4 inch

Trend Trend C116X1/2TC 12.7 x 25.4mm Bearing Guided Trimmer

Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 79.5 mmShank Diameter 1/2 inch

Trend Trend C162AX1/4TC 104° Dovetail Cutter

These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.D 15 mmC 13.5 mmOverall length 63 mmB 12.7 mmA 104 degreesShank Diameter 1/4 inch

Trend Trend C096X1/4TC Ogee Quirk

By raising the cutter, the top quirk is removed. Alternative bearing Refs. B95A & B127A.D 35 mmC 13.5 mmB 12.7 mmR 4 mmOverall length 65 mmShank Diameter 1/4 inch

Trend Trend 9/60X1/2TC Corner Bead Cutter

By making a second pass at 90 degrees a full corner bead can be cut out. A side fence is needed for guidance.D 30 mmD2 25 mmC 23 mmR 7 mmShank Diameter 1/2 inch

Trend Trend TR42X1/2TC Intumescent Cutter

For 4.0mm thick strip the TR42 is for 15.0mm wide intumescent strip.D 40 mmC 15 mmB 32 mmE 4 mmShank Diameter 1/2 inchFire check 45 minutes

Trend Trend S11/11X1/4STC Triple Flute Engraver

Cuts cleanly without feather edging.D 14.5 mmC 12.5 mmC2 14 mmA 60 degreesShank Diameter 1/4 inch

Trend Trend C060X1/4TC Radius Cutter

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.C 9/16 inchC 14.3 mmD 22.2 mmOL 64.2 mmB 9.5 mmR 6.3 mmOverall length 64 mmShank Diameter 1/4 inch

Trend Trend C265X1/4TC Bearing Guided Glazing Bar Cutter

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.D 28 mmC 19 mmB 12.7 mmR 10 mmOverall length 70.5 mmShank Diameter 1/4 inch

Trend Trend SP-QUAD/18 Replacement Quad Groover Blade

Replacement blade for the Trend QUADX1/2TC Quad groover set

Trend Trend SL/E 2.0mm Slotter Blade

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.D 40 mmKerf 2.0 mmNo. of Teeth 2

Trend Trend C199X1/2TC 19 x 50mm Double Guided Trimmer

Allows templates to be placed either on top or the bottom of the material, for ease of routing.

Trend Trend C034AX1/4TC Single Flute Cutter

Single fluted Tungsten Carbide straight cutter for fast free cutting.D 5/64 inchD 2.0 mmC 13/64 inchC 5.0 mmOverall length 52 mmShank Diameter 1/4 inch

Trend Trend PSC/106X1/2TC Easyset Profile Scribe Set

These tools produce the same type of joint & use the same components as the combination PSC sets.D 46 mmD2 42 mmC 15 mmC2 6.3 mmB 22 mmR 10 mmShank Diameter 1/2 inchTimber thickness min. 21 mmTimber thickness max. 26.5 mm

Trend Trend SL/CC 2.5mm Slotter Blade

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.D 40 mmKerf 2.5 mmNo. of Teeth 2

Trend Trend C145AX8MMTC 6mm Slotting Cutter

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations.D 31.8 mmC 15/64 inchC 6 mmB 12.7 mmE 9.5 mmOverall length 65 mmShank Diameter 8 mm

Trend Trend C058X1/2TC Radius Cutter

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.D 1 inchD 25.4 mmC 5/8 inchC 15.9 mmR 12.7 mmOverall length 54.5 mmShank Diameter 1/2 inch

Trend Trend C160AX1/4TC Dovetail Cutter

A dovetail cutter for the Titan Dovetail jig with the 12 mm combD 5/8 inchD 15.9 mmC 14 mmOverall length 54 mmA 104 degreesShank Diameter 1/4 inch