Power Tools | Tools and Machinery Supplies : Great Range, Great Prices

Category Archives: Power Tools

Trend Trend 3/51X1/2TC 9.5 x 32mm Two Flute Straight Cutter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges.All cutters above and including 9.5mm diameter, have TCT plunge centre tips.D 3/8 inchD 9.5 mmC 32 mmOL 76 mmShank Diameter 1/2 inch

Designed for constructing wooden vacuum forming moulds.D 16 mmC 63 mmOL 110 mmA 87 degrees

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes.D 36 mmD2 16 mmC 33 mmR 20 mmShank Diameter 1/2 inch

To increase gluing area producing a strong joint in drawer production.D 25.4 mmC 12.7 mm

Classic skirting board mould.D 37 mmC 40 mmB 16 mmR 13.5 mmShank Diameter 1/2 inch

Precision made laser cut zinc plated steel template comb for the CDJ600.

Precision made laser cut zinc plated steel template comb for the CDJ300.

TCT drill for use on glass, porcelain, tile and mirrors.

For coves and part of a rule joint. 1/2″ Shank.D1 20 mmCut length 18 mmOverall length 57 mmR1 10 mm

For coves and part of a rule joint.D 1 1/2 inchD 38.1 mmC 1 1/4 inchC 31.7 mmR 3/4 inchR 19.1 mm

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints.

For coves and part of a rule joint with 1/2″ shank diameter.D 12.7 mmC 19 mmR 1/4 inchR 6.3 mmOL 56 mm

This two flute cutter gives a finer finish and has better plunge cutting characteristics.D 1/4 inchD 6.3 mmC 28 mmOL 63 mmShank Diameter 1/4 inch

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3 mmC 3/8 inchC 9.5 mmOverall length 56.5 mmShank Diameter 1/4 inch

For producing ovolo and rounding over edge moulds, using a side fence or back fence.D 1/2 inchD 12.7 mmC 23/64 inchC 9 mmR 4.8 mmOverall length 51.5 mmShank Diameter 1/4 inch

Ideal panelling cutter for kitchen or cabinet doors.D 32 mmC 11.5 mmR 26 mm

For veining, panelling, ‘V’ grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 7/16 inchC 13 mmC2 13 mmC3 11 mmA 60 degreesOverall length 53 mmShank Diameter 1/4 inch

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 8 mmC 25 mmOverall length 68.5 mmShank Diameter 8 mm

Reinforced plastic lift and lock ratchet system.Thread M6Thread Length 30 mmH 28 mmD 42 mm

This can be used for recessing circular hinges, accurate repetitive routing. This should be used with a template and guide bush fitted to the router base.D 35 mmOL 60 mm

Categories
Categories

Best Sellers
- Sealey Sealey BT91/9 Battery Carrier
  
  This Battery Carrier has been designed with a tubular steel handle and comfort grip. Read More »
- Trend Trend 4/2X1/2TC 16 x 19mm Two Flute Straight Cutter
  
  TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 5/8 inchD 16 mmC 19 mmOL 60 mm Read More »
- Dickies Dickies ‘Redhawk’ Action Trousers Black – 48S
  
  Dickies action trousers are hard wearing and reliable complete with a wide range of features for ultimate performance and durability. They are also compatible with the Read More »
- Laser Laser 5226 – M13 x 1.25 Oil Sump Repair Kit
  
  For use on sumps where the thread has been stripped, this kit allows for a quick and simple repair, preventing a potentially expensive oil sump replacement. Read More »
- Clarke Clarke JumpStart® 910 with 12V Compressor
  
  The Clarke Jumpstart 910 provides vital standby or emergency power for the home, vehicle, business or boat. With its built in air compressor it is also Read More »
- Clarke Clarke Devil 1600 Propane Fired Space Heater
  
  Heat your workshop, industrial unit or garage with the Clarke Devil 1600 Space Heater which has been designed to provide highly efficient and low cost heating, Read More »
- Scheppach Scheppach DH6000 Dehumidifier (230V)
  
  Whether you have flooding to clean up or wish to prevent moisture-related damage, our commercial dehumidifiers quickly and efficiently allow you to reach and maintain a Read More »
- Machine Mart Xtra Facom 49.60SR 60mm Non-Sparking Metric Open End Slogging Wrench
  
  The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when Read More »
- Dremel Dremel 511S EZ SpeedClic Finishing Abrasives
  
  The Dremel 511S is for precise and delicate material removal on metal, glass, wood and plastic. The flexible material enables to work on tight and irregularly Read More »
- GMC Publications Small Woodworking Projects
  
  Nothing beats seeing your woodworking on display or the reaction you get when you give your work as a gift. The problem is finding enough time Read More »
- Forest Forest 6x8ft Apex Overlap Pressure Treated Shed
  
  This larger 6×8 overlap garden shed features a traditional apex roof design, giving an attractive appearance. The larger size of this wooden shed makes it ideal Read More »
- Lifting & Crane 220m x 10mm Polypropylene Rope
  
  Read More »
- National Abrasives 178mm P180 Professional Floor Sanding Discs 5 Pack
  
  These professional floor sanding discs are professional grade 220g E weight sheets, suitable for use with the 178mm Edge Floor Sander on boards, soft & hardwoods. Read More »
- Wera Wera 7781 Click-Torque X Ring Spanner Insert 15mm
  
  A ring spanner insert for hexagon screw heads or nuts that can also be used with torque wrenches that are part of the Click-Torque X series. Read More »
- Facom Facom AND4X200SR PZ4 10mm Non-Sparking PoziDriv Screwdriver
  
  The new ‘Facom ADF’ non-sparking tool range has been designed for use in explosive or flammable atmospheres, where regular tools may create potentially dangerous sparks when Read More »

Category Archives: Power Tools

Categories

Best Sellers

Today’s Deals

Popular Products

Monthly Choice