Dickies Dickies GDT290 Duo Tone Trousers 40″ Reg | Tools and Machinery Supplies : Great Range, Great Prices

Disclosure :This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Dickies Dickies GDT290 Duo Tone Trousers 40″ Reg

Fashionable hard wearing workwear trouser. Made from hard wearing cotton with Cordura knee pad pockets. Cordura is a high performance fabric extremely resistant to tearing,scuffing and abrasion.

Related Products :

Categories
Categories

Best Sellers
- Tsurumi Tsurumi POMA Automatic Dirty Water Sump Pump
  
  Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps large soft solids in suspension. Not suitable for ponds or water features. Made from tough Read More »
- Machine Mart 24” (600mm) Ruler & Angle Finder
  
  The 24″(600mm) Ruler & Angle Finder measures obtuse and sharp angles as well as finding impeding angles. It measures both plumb and level and has a Read More »
- Machine Mart Xtra Facom J.7/8. 3/8″ Drive OGV Socket 7/8″
  
  Higher torque without damage to fasteners ! The OGV profile is achieved by a succession of curves instead of the flats found in conventional sockets. More Read More »
- Draper Draper RHL3W/LE/G 3W Li-Ion Rechargeable Hand Torch
  
  This 3W Li-ion rechargeable hand torch is ideal for camping, caravanning, vehicle breakdowns, security and many other situations. Made from high quality, impact resistant ABS plastic. Read More »
- Trend Trend TR/PACK/2 Router Bit Trade 3 Pack
  
  Pack of three TR17X1/2TC precision made TCT router cutters.D 1/2 inchD 12.7 mmC 50 mmOverall length 93 mmShank Diameter 1/2 inch Read More »
- Facom Facom 467B 7mm Anti Slip Combination Ratcheting Spanner
  
  This high performance spanner is suitable for aircraft fasteners with an integral reversing lever which avoids any risk of accidental reversal. The Facom 467B is angled Read More »
- Machine Mart Xtra Scheppach HS80 8″ Bench Top Table Saw
  
  This compact, yet powerful table top saw is great for DIY woodworkers. Designed to fit neatly on to benches and table tops, the HS80 from Scheppach Read More »
- Dremel Dremel 8220-2/45 10.8V Lithium-Ion Multi-Tool Kit
  
  High end cordless multi-tool with a powerful motor and enhanced 10.8V 2.0 Ah Li-ion battery. The 8220 also features an on-board LED to maximize visibility and Read More »
- Laser Laser 7067 Split Gear Alignment Tool – Vauxhall/BMW
  
  These split gears are used to reduce gear chatter and noise. However, when it comes to service and repair these split gears can often make disassembly Read More »
- 110Volt Bosch GTS 10 J Professional Table Saw (110V)
  
  The extremely compact and powerful GTS 10 J professional table saw from Bosch. This table saw features a powerful 1800Watt motor with starting current limitation and Read More »
- Shop Vac Shop Vac MCS-SQ11 Micro 4l Handheld Wet and Dry Vacuum Cleaner (230V)
  
  Shop Vac’s MCS-SQ11 Wet and Dry Vacuum Cleaner offers a lightweight and portable design making this the ideal choice for quick wet and dry pick up Read More »
- Werner Werner Workstation Platform Ladder 4 Tread
  
  The 70504 4 tread Work Station Stepladder features twin safety handrails for increased support when climbing the ladder. With a platform height of 0.8m, the large Read More »
- Clarke 6pc Cutting Tool Set for CL300M
  
  A six piece P30 grade drop forged steel cutting tools with tungsten carbide cutting tips. Includes Cranked Turning & Facing Tool, Rough Boring Tool, Inside Corner Read More »
- Rolec Rolec AutoCharge:EV Token Mech 2 x 7.2kW (32A) Type 2 Sockets
  
  The AUTOCHARGE:EV EVTM0021 Token Mech is a heavy duty, hard wearing EV charging pedestal, specifically designed and manufactured for both commercial and public facing environments. This Read More »
- Machine Mart Xtra Facom R.10E R 1/4″ Drive 12-Point OGV Socket 10mm
  
  Higher torque without damage to fasteners ! The OGV profile is achieved by a succession of curves instead of the flats found in conventional sockets. More Read More »

Today’s Deals
- Laser Laser 7157 Aluminium Torque Wrench 200-1000Nm 3/4” Drive
  
  The Laser 7157 is an aluminium torque wrench with a 3/4” drive and 200-1000Nm/560Ftlbs range. This unit features a multi- lever mechanism gives greater sensitivity and Read More »
- Shop Vac Shop Vac 87PM140040 Pump Vac Wet and Dry Vacuum Cleaner (230V)
  
  The Shop Vac Pump Vac Cleaner is capable of collecting both wet and dry messes, whilst also being able to pump water at a rate of Read More »
- Draper Draper FCR-BCT Battery Configuration Tool
  
  This battery configuration tool for vehicles equipped with start/stop and/or a regenerative braking system. When replacing the battery on such vehicles the necessity for the battery Read More »
- Clarke Clarke CHT844 500ml Oil Can
  
  An oil can is an essential in any workshop or garage, for maintenance of expensive tools and equipment. This model has a flexible spout and pump Read More »
- Teng Teng TTAF32 32 Piece 1/4″ & 3/8″ Imperial Socket Set
  
  Set containing 1/4″and 3/8″drive 6 point sockets, regular and deep. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use Read More »

Popular Products
- Draper Draper PBBK Expert Pneumatic Brake Bleeder Kit
  
  The Draper PBBK Expert Pneumatic Brake Bleeder Kit is for for use on vehicles unable to have brakes bled by the suction method and ABS systems. Read More »
- Laser Laser 12 Spanner Rack/Organiser
  
  A spanner rack/organiser for 12 spanners. Manufactured from TPR material. Read More »
- WD40 WD-40 Specialist Motorbike Brake Cleaner 500ml
  
  WD40 Specialist Motorbike Brake Cleaner is designed to quickly remove brake dust, dirt, oil, and brake fluid from brake and clutch systems. The fast working formula Read More »
- Trend Trend TR39X ½” Door Leading Edge Cutter
  
  3° under cut router bit for routing the leading edges of timber doors to ensure a tight fit against door jamb Read More »
- Lumag Lumag VH500 500kg Petrol Track Barrow
  
  The Lumag VH500 track barrow is a quality track barrow. It is a fully hydrostatic, robustly made machine fitted with a Loncin G200 engine.This machine was Read More »

Monthly Choice
- V-TUF V-TUF VTB911 Industrial Three Speed Blower (110V)
  
  Featuring an industrial grade turbine, rugged construction, non marking wheels and 3 air flow speeds, the VTB911 is ideal for flood restoration work in any environment. Read More »
- Draper Draper All Steel Spade
  
  This draper spade has an all-steel tubular shaft with a sturdy socket. It also features a y-shaped handle for added comfort during use. Read More »
- Dickies Dickies Redhawk Zip Front Coverall Grey 40T
  
  Dickies Redhawk Coverall is a Value for money, hard wearing, easy care boilersuit, what more could you want? Packed with pockets and other features, it’s not Read More »
- Barton Storage Barton Topstore 013059 6 Shelf Cabinet with 52 TC4 Blue Containers
  
  This Topstore Container Cabinet comes fully assembled and ready for any workshop, garage, office space or stock room. Manufactured from hard wearing epoxy powder coated steel, Read More »
- SCH Supplies SCH Supplies 48″ Slitter Attachment
  
  When fitted to the 48″Mounted Carrier Frame – F48M (sold separately), the Slitter is used to improve drainage and stimulates growth. Well drained grass areas will Read More »