Power-Tec Power-Tec Pry & Surface Spoon | Tools and Machinery Supplies : Great Range, Great Prices

Disclosure :This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Power-Tec Power-Tec Pry & Surface Spoon

This Pry & Surface Spoon is made from top quality forged steel, heat treated under controlled conditions, ground and polished to a high standard.

Related Products :

Categories
Categories

Best Sellers
- Timberland Pro® Timberland PRO® Euro Hiker Lace up Safety Boot Black Size 9
  
  The Timberland Euro Hiker safety boot has been constructed with a steel toe cap and a steel midsole, to protect you against threats from both directions. Read More »
- National Abrasives Wet & Dry Silicon Carbide Paper – 5m, 1200 Grit
  
  Read More »
- Machine Mart Roughneck 600mm/24” Chrome Aligning Bar
  
  Aligning Bar for Aligning Bolt Holes and other incisions in the Automotive and Engineering markets- can also be used as a wrecking and Pry Bar Read More »
- Trend Trend GB158 Guide Bush, 15.8mm Diameter
  
  Guide bush guides the router when using a template.Outside diameter 15.8 mmOutside diameter 5/8″Inner diameter 14 mmProjects from plate 6 mm ID 14 mmPlate diameter 60 Read More »
- Clarke Clarke FP100 Single Barrel Foot Pump
  
  A single barrel air foot pump for tyres, airbeds, balloons, swimming pool and beach toys, boats and a host of other inflatables. Sturdy steel construction throughout Read More »
- Handy Q Garden QGPGC 150kg Dump Cart
  
  The Q garden dump cart benefits from a 150kg load capacity and a 100kg tipping capacity making it easy to move all types of loads around Read More »
- SIP SIP Winntec 2 Tonne Long Chassis Trolley Jack
  
  Constructed for heavy duty lifting the Winntec 2 tonne jack features a low profile for versatility and a foot operated pump to allow for easy movement. Read More »
- Wera Wera 8790 HMA HF Zyklop 11mm 1/4” Drive Socket
  
  The Wera 8790 socket is ideal for non-impact manual or power tool operations. This socket benefits from a chrome vanadium finish combined with a ball stop Read More »
- Forest Forest 3x5ft Apex Overlap Dipped Shed (Assembled)
  
  This compact 3×5 overlap apex shed ideal for smaller gardens, with the traditional apex roof to give an attractive appearence and the square cut overlap construction Read More »
- Machine Mart Xtra Facom K.27HB 3/4″ Drive 6 Point Socket 27mm
  
  Higher torque without damage to fasteners ! The OGV profile is achieved by a succession of curves instead of the flats found in conventional sockets. More Read More »
- Ryobi Ryobi RAC103 2.0mm Trimmer Line (50m)
  
  This round trimmer line is compatible with electric corded, cordless and petrol Grass Trimmers including Ryobi RLT36, RLT36C3325, RLT36C33. Read More »
- Warrior Warrior ALR10 Red Aluminium Fairlead Hole
  
  This Warrior Aluminium Fairlead is designed for use with synthetic rope wound upon a 10″ winch drum. Read More »
- Clarke Clarke Regal III 9.2kW DEFRA Approved Cast Iron Multi Fuel Stove
  
  A stylish multi fuel stove which adds a sense of modern yet timeless style to any room. The Regal III is approved for burning wood in Read More »
- Bosch Bosch GDE 16 Cyl Professional Dust Extraction Adapter
  
  This Bosch Adapter allows for precise work thanks to the sturdy aluminium telescopic rail, whilst also allowing for maximum flexibility. This is suitable for both right-handed Read More »
- Clarke Clarke 16ft x 20ft (Approx) Green Polyethylene Tarpaulin
  
  This quality polyethylene tarpaulin is ideal for building sites, boats & trailer covering, camping and other applications. It can even be used as temporary roofing if Read More »

Today’s Deals
- National Abrasives 75mm Crimped Wire Brush (M14)
  
  Read More »
- Trend Trend TEMP/IN/PIG Pig Inlay Template
  
  Inlay kit allows a shaped pocket and matching inlay patch to be routed easily with a router cutter to create perfect inlays.Clear 6mm plastic inlay templates Read More »
- Facom Facom 440.11/32 Combination Spanner 11/32″
  
  The combination spanner re-invented!More Control during pre-tighting, easier to guide, variable handle cross section doubles surface contact with hand. High mechanical performance combined with compact design Read More »
- Draper Draper Expert 5204PRO 3/4″ Drive Composite Body Air Impact Wrench
  
  This Draper expert quality impact wrench has a composite body that makes for a lightweight but rugged tool to reduce operator fatigue and the ‘cold sink’ Read More »
- Warrior Warrior ATC001 Winch Cover for Winches 2000lb to 4000lb
  
  This winch cover from Warrior comes complete with the “Warrior”motif to the front and fits winches with up to 4000lbs pulling power. Read More »

Popular Products
- Bosch Bosch GDR 12V-LI Professional Cordless Impact Driver (Bare Unit)
  
  The Bosch GDR 12-LI Professional Cordless Impact Driver is the shortest cordless impact driver in its class. It has the shortest overall design at just 137mm. Read More »
- Sealey Sealey 1000ETJ 1 Tonne Vertical Transmission Jack
  
  Manufactured to exacting standards and suitable for general workshop applications. Model features dead man’s handle for added safety and strong construction for durability. This economy hydraulic Read More »
- Facom Facom JET.A14M4 – Wood Panel Accessory
  
  To be fitted on the aluminium worktop of JET+4 rolling chests. In 15mm thick varnished beech multiply. Read More »
- Ryobi Ryobi RJS750-G 500W Jigsaw (230V)
  
  This Jigsaw from Ryobi offers high accuracy with the PRO STROKE mechanisms and LINEASSIST, along with the with ergonomic handle and detachable vacuum port. Read More »
- Wera Wera 8767 A HF Zyklop TORX® 1/4″ Drive TX15 Bit Socket 28mm
  
  The Wera TORX bit socket benefits from a unique design that allows this socket to be attached securely to the tool in use and a knurled Read More »

Monthly Choice
- Lumeter Lumeter Certalube Grease Gun
  
  The Lumeter A1026/HDH is a certalube, variable stroke pistol grip grease gun with 500cc bulk fill or 400g cartridge. This product comes with an extendable arm Read More »
- Dickies Dickies ED24/7R Black/Red Work Trousers 42″ Short
  
  The Dickies ED24/7 Work Trousers are free of any exposed metals such as zips and buttons making them scratch-free and suitable across all industries. Cargo pockets Read More »
- Machine Mart Xtra Facom 55A.16X18 OGV Offset Ring Spanner 16X18mm
  
  Higher torque without damage to fasteners ! The OGV profile is achieved by a succession of curves instead of the flats found in conventional sockets. More Read More »
- Machine Mart Xtra Nilfisk ALTO 11298A Polishing Brush for Nilfisk Spintec 443
  
  Read More »
- Machine Mart Xtra Laser 5276 – Timing Tool Kit For BMW N62/N73 Engines
  
  An essential timing chain tool kit for BMW 3.6, 4.0, 4.4 & 4.8 litre N62 V8 and N73 V12 engines fitted to a wide variety of Read More »