Trend Trend 3/13×1/4TC 5.5 x 19mm Two Flute Straight Cutter | Tools and Machinery Supplies : Great Range, Great Prices

Disclosure :This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Trend Trend 3/13×1/4TC 5.5 x 19mm Two Flute Straight Cutter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Two flutes give a clean finish to cut edges.D 7/32 inchD 5.5 mmC 19 mmOL 51 mm

Related Products :

Categories
Categories

Best Sellers
- Facom Facom S.30 1/2″ Drive 12 Point OGV Socket 30mm
  
  Higher torque without damage to fasteners ! The OGV profile is achieved by a succession of curves instead of the flats found in conventional sockets. More Read More »
- Draper Draper DMM401 Digital Multimeter (Auto-Ranging)
  
  The Draper 41824 is an auto ranging multimeter capable of testing voltage, current, resistance, diode, continuity, capacitance, frequency and temperature. This model is fitted with a Read More »
- Wera Wera Joker Wrench Ratchet Combiination Spanner – 16mm Sb
  
  The Joker ratchet wrench spanner is a real revolution in wrench technology. The Joker performs fastening jobs in almost every conceivable situation, quickly and with great Read More »
- Wera Wera 9 Piece Zyklop Socket Set Belt 3/8” Square Drive
  
  This 9 piece socket set belt can be secured to a belt loop or pocket and has been designed with a smooth twist to unlock mechanism, Read More »
- Clarke 5″ to 6″ Appliance Connector Vitreous to Stainless
  
  A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system Read More »
- T. B. Davies TB Davies 9 Tread 2m Bridging Platform (90 x 53cm) Platform
  
  The TB Davies industrial bridging step is ideal for use in factories and distribution centres to allow for safe access over machines and conveyor systems. This Read More »
- Laser Laser 5669 Low Rise Car Ramps (One Pair)
  
  These Laser Low Rise Car Ramps are ideal for use with lowered vehicles and sports cars. Capable of withstanding up to 5000kg (per pair), these ramps Read More »
- Warrior Warrior Samurai 4500kg 12V DC Steel Rope Winch
  
  This superb high specification winch is ideal for recovery and 4×4 applications. Outstanding features include quality series wound double sealed motor with brass fittings, heavy duty Read More »
- Record Power Record Power BDS250 10″ x 6″ Belt & Disc Sander
  
  The Record Power BDS250 10″x 6″Belt & Disc Sander is heavy duty and has more than enough power to handle the demands of sanding as well Read More »
- Dickies Dickies EH30050 Eisenhower Max Trousers Black 42″ Tall
  
  The Dickies Eisenhower Max Trousers are a heavier weight than a standard knee pad trouser at 285gsm, these also feature tough Cordura knee pad pockets and Read More »
- Clarke Clarke CTJ10GLS 10 Tonne Heavy Duty Trolley Jack
  
  The Clarke CTJ10GLS Heavy Duty Trolley Jack benefits from an extra-long reach, large 148mm diameter saddle and 10 Tonne capacity for easy lifting and a secure Read More »
- Laser Laser 7012 Professional Bit Set 3/8″ & 1/2″Drive 60 Pieces
  
  This 60 Piece bit set has been manufactured in SCM-V steel with a phosphate coating and chrome vanadium bit adaptors. This hard wearing set is also Read More »
- Bosch Bosch BT300 HD Professional Building Tripod
  
  This tripod allows for flexibility and user comfort thanks to the adjustable working height and stable design on a range of surfaces. Read More »
- Dickies Dickies JW7017 Wakefield Grey Reflective Jacket
  
  The Dickies wakefield is a soft shell jacket that is reflective in low light conditions ensuring you are safer when out in adverse lighting conditions. This Read More »
- Sealey Sealey GA70CR Calibration Rig for GA70
  
  The Sealey GA70CR Calibration Rig is used to check and adjust the alignment of the lasers on Model No. GA70 Four-Wheel Laser Aligner.This unit allows workshops Read More »

Today’s Deals
- Roughneck Roughneck 14lb Bent Digging Bar – 60″x1″
  
  This long crowbar has been hand forged by very skilled craftsmen. This Roughneck 14lb/6.4kg Posthole Digger-60″x1″ features an extra length chisel blade for post hole digging. Read More »
- Facom Facom 440.1’1/2 Combination Spanner 1’1/2 “
  
  The combination spanner re-invented!More Control during pre-tighting, easier to guide, variable handle cross section doubles surface contact with hand. High mechanical performance combined with compact design Read More »
- Forest Forest Lightweight Concrete Fence Post (H)236cm 4 Pack
  
  These concrete fence posts have been designed to be up to 45% lighter than existing products allowing for easier and faster installation. These posts can be Read More »
- T. B. Davies TB Davies 5 Tread British Standard Stepmobile Yellow
  
  This TB Davies unit has been manufactured to the demanding EN131-7 standard to ensure excellent durability, safety and reliability. This model features strong sprung castors that Read More »
- Sealey Sealey MS063A Motorcycle Dolly Rear Wheel – Side Stand Type
  
  Motorcycle dolly holds a single motorcycle or sports bike with a side stand, weighing up to 300kg. Easy to manoeuvre around the workshop or garage. Front Read More »

Popular Products
- Wera Wera 8790 HMC HF Zyklop Socket with Fastener Holding Function 1/2″ Drive x 19mm Hex
  
  Wera 8790 HMC HF Zyklop Sockets with Holding Function can, via a unique design, hold the fasteners within the socket. Assembly or disassembly becomes easy where Read More »
- Elora Elora 205 S11W 11 Piece Whitworth Combination Spanner Set
  
  Elora’s 205 S11W Combination Spanner Set has been forged from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection, complete with the polished bi-hexagon Read More »
- Machine Mart Xtra Facom JET.5M3 – 5 Drawer Tool Cabinet (Red)
  
  This 5 drawer cabinet from Facom’s jet ‘+3’ series is a rugged, highly durable piece of kit. Featuring two 60mm high drawers, two 130mm high drawers Read More »
- Sealey Sealey DRP11 Barrel Bund (1200 x 1200 x 275mm)
  
  The Sealey DRP11 is an ideal oil storage solution that fully complies with new storage regulations introduced in 2005 and is manufactured from heavy duty 3.5mm Read More »
- Dickies Dickies Redhawk Zip Front Coverall Grey 50T
  
  Dickies Redhawk Coverall is a Value for money, hard wearing, easy care boilersuit, what more could you want? Packed with pockets and other features, it’s not Read More »

Monthly Choice
- Laser Laser 2032 24mm ½” Drive Deep Air Impact Socket
  
  This Laser 2032 Deep Air Impact Socket (24mm 1/2″Drive) is manufactured from Chrome vanadium. It is ideal for use with air impact tools. Read More »
- Obart Select Obart FloodMate Defence Kit with 100W Submersible Pump (230V)
  
  The FloodMate 1 is an emergency pumping kit for defending property from low level flooding. This set includes a 230V, 100 Watt submersible pump (model BPS100, Read More »
- Machine Mart Xtra Trend 18/42X1/2TC Panel Mould 1/2″ Shank
  
  To create profiles in the face or edge of drawer fronts and cabinet doors.D 1 inchD 25.4 mmC 17.5 mmR 5 mmR2 6.35 mm Read More »
- Kleen-Tex Kleen-Tex Kleen-Scrape Entrance Matting 85x300cm
  
  This Kleen-Tex multi-purpose rubber mat can be used outdoors or indoors. It has anti-fatigue properties, making it perfect for people who stand for prolonged periods of Read More »
- Trend Trend INLAY/KIT/A Inlay Kit with 3.2mm cutter
  
  For use with T5 and other compatible routers. Comprises a 1/8 inch down cut spiral router cutter Ref. S55/02LHX1/4STC, guide bush and inlay collar.Guide bush ID Read More »